Surface Type Back to Back Slitter Rewinder for PE Film Paper Roll

YOUTUBE VIDEO

Surface Type back to Back Slitter Rewinder For PE film Paper roll (BM-700)

  
 Application                                                              

This machine is suitable for BOPP,PET,PE,PVC,Aluminum foil,Paper,insulation material vermicelli.
Features:

1. Rewind in the middle by surface type friction
2. Auto count meter, Alarming and so on.
3. Applying A,B air shafts in wind, easy operation.
4. EPC guiding in the unwind, more smooth for wind, even disorder materials.
5. Straight cutting system of 10sets
6. 3" air shaft in unwind and rewind

1. Material: thin paper from 10-100g
2. Effective width:20-1200 mm
3. Thickness range: 14-100g/m2(up to different materials)
4. Max unwind diameter: φ800mm
5. Max wind diameter: φ600mm
6. Wind air shaft diameter: φ76mm(3")  2 pieces
7. Accuracy of EPC:±2mm
8. Precision of slitting: ±0.5mm
9. Machine speed: 10-160m/min
10. Main motor:4kw
11. Frequency converter: 4kw
12. Apply photocell sensor in EPC

1. Horizontal type of machine
2. Magnetic tension: 10-100N
3. Magnetic brake : 1pcs * 5kg
4. Aluminum roller treated by balanced system (φ60 1230mm)
5. Photocell sensor in unwind: 1 set
6. EPC applies synchronous motor   1 set
7. Diameter of unwind: φ800mm

1. Construction: two air shafts (one is ok )
2. Size of air shaft: φ76×1250m    2 pieces
3. Magnetic clutch: 5kw (cooling by water)            2 sets
4. Driving: belt by gears
5. Diameter of wind: φ600mm
6. Pressing method:air cylinder pressing and lean against on a big roller

1. Dis-charge : by blowers
2. Main motor power:4kw  1 set

1. straight knives: 8 sets

1. Main controlling panel: main power,tension controlling,speed adjusting and so on.
2. Main controlling: main motor and main controlling box
3. Tension controlling: unwind,wind,different tension at different speeds to make the product wind smooth
4. Auto stop when reaching the setting length

     
Voltage:
3 phase,380V,50HZ(please inform if voltage is different)

Main Technical