Vertical Type Pet BOPP PE Film Roll Slitting and Rewinding Machine

Product Description

Product Description

 

Vertical Type Slitting and Rewinding Machine

 

 

 

   Application                                                              

 

This machine is suitable for BOPP,PET,PE,PVC,Aluminum foil,Paper,insulation material vermicelli.

1. Auto count meter,Alarming and so on.

2. Applying A,B air shafts in wind,easy operation.

3. EPC guiding in the unwind,more smooth for wind,even disorder materials.

4. Disk cutting system

5. 3" air shaft  3pcs

 

 Main Technical                                                              

 

Model	DC-FQ700L	DC-FQ1100L	DC-FQ1300L
Max.width of finished product	700mm	1100mm	1300mm
Max.diameter of raw material	Φ600	Φ600	Φ600
Diameter of finished product coil	Φ400	Φ400	Φ400
Speed of parting cut	0-150m/min	0-150m/min	0-150m/min
Power of electric machine	3kw	4.5kw	5.5kw
Weight	1800kg	2200kg	2500kg
Overall dimension	2500x1300x1350mm	2500x1800x1350mm	2500x2000x1350mm

 

Product Parameters

 

1. Unwinding Section:  
   - Frame: 120# high-quality cast structure.  
   - 45# steel support.  
   - Photoelectric alignment system (precision: ±0.5mm) - 1 set.  
   - Magnetic particle tension control (10-50N·m).  
   - Alignment host: 90-type synchronous motor-driven - 1 unit.  
   - Magnetic tension controller (5kg) - 1 unit.  
   - Photoelectric tracking correction - 1 unit.  
   - Loading shaft: Pneumatic shaft - 1 unit.  
   - Manual substrate adjustment: Left/right and parallel adjustment.  
   - Guide rollers: Aluminum rollers with dynamic balancing treatment.  

2. Main Machine Section  

   Traction Device:  
   - Structure: Active traction with pneumatic pressing.  
   - Pressing method: Cylinder-controlled.  
   - Cylinder specifications: φ50×25 - 2 units.  
   - Pressing roller: Rubber roller (φ90×1330mm) - 1 unit.  
   - Drive roller: Chrome-plated roller (φ110×1330mm) - 1 unit.  
   - Drive method: Main motor drives the main shaft, which then drives the traction roller.  

   Drive and Transmission Mechanism:  
   - Main drive combines motor and variable-speed pulley.  
   - Main motor: 4KW variable-speed motor - 1 unit.  
   - Inverter: Shenzhen Sine Co., Ltd. (4KW).  
   - Transmission: Belt pulley and 8M synchronous belt mechanism.  
   - Guide rollers: Hard-anodized aluminum rollers (φ80×1330mm).  

   Slitting Device:  
   - Straight-knife structure.  
   - Includes 8 sets of straight-knife holders.  

3. Winding Device:  
   - Structure: Dual pneumatic shafts (single-shaft winding optional).  
   - One-key shaft locking, one-key inflation, rotary touchscreen.  
   - Clutch (external rotation): 5KG - 2 units.  
   - Unwinding diameter: Φ600mm.  
   - Pressing method: Cylinder sleeve structure and back-pressure shaft device - 2 units.  
   - Transmission: 8M synchronous belt.  
   - Tile-type pneumatic shafts (φ76×1290mm) - 2 units.  

4. Waste Discharge Device:  
   - Discharge method: Blow-off waste removal.  
   - Blower: Three-phase asynchronous motor (0.55KW) - 1 unit.  

5. Control Section:  
   (1) The control system includes main machine control, tension control, and other controls.  
   (2) Main control: PLC + HMI (tapered tension).  
   (3) Tension control: Unwinding/winding tension with wide speed range, excellent performance at both low and high speeds.  
   (4) Superior winding results.  
   (5) Equipped with electronic length counter, alarm stop, and automatic fixed-length cutting.  
   (6) Preset slitting length for automatic.  

6. Supporting Facilities (Customer's Responsibility):  
   - Power supply: Three-phase four-wire air switch (380V, 50Hz).  
   - Air compressor: 1.5KW.
  

Packaging & Shipping